The pH level represents one of the most crucial components of your pool’s chemical balance. Adjusting your swimming pool’s pH in Phoenix can greatly help you in safeguarding the heater, pump, and other components of the system from damage. It can also help you maintain the water’s clean and crystal clear quality, and can make your pool’s finish appear brand-new.

      The acidity of the swimming pool water is gauged by its pH value. On a scale of 0 to 14, acidic water has a pH below 7.0. The water is considered basic or alkaline if the pH is 8.0. The ideal pH range for a pool is between these two points, or 7.4 and 7.8.

      In this article, we’ll talk about some of the reasons it is highly important to balance your swimming pool’s pH levels.


      Acidic Water Can Affect the Body

      Acidic water dries out the body’s natural oils, leaving skin that is dry and itchy and hair that is brittle, in addition to stinging the eyes and nasal passages. 

      Oddly and regrettably, if the pool’s pH rises too high, the same bodily problems may manifest. The average human body is naturally close to the scale’s neutral value.


      Corrosion is Possible

      Acidic pool water can start to corrode anything, including the bases of ladders, slides, and diving boards, as well as pumps and other mechanical components. Even the plaster in gunite pools can be corroded or etched by low pH water.

      Patio Table and Chairs Beside Pool

      High pH Can Bring Cloudy Water

      As pH increases, a lot of minerals are drawn out of solution. The result may be mineral deposits and murky water.


      Vinyl Liners Will Be Affected

      A vinyl liner can really grow when the pH is too low or too high, producing unattractive wrinkles by accumulating up to 10% of its weight in water. A vinyl liner will age more quickly and need to be changed sooner if your pool’s pH level becomes too high.


      It Can Render Your Chlorine Useless

      Your chlorine’s impact decreases as your pH level moves deeper into the basic or alkaline range. This is somewhat alarming because as a result of this reaction, your water will still end up cloudy despite spending an excessive amount of money on chlorine alone.


      pH Testing is Crucial

      Close up swimming pool

      It is important that you monitor your pool’s pH level daily using test strips. To test your water, go to an area away from the skimmer and the returns and follow the instructions on the package. 

      Remove the strip from the water but don’t shake excess water off. Wait for the colors to fill in, then compare the strip to the color range on the product container.

      Then, to change the pH, either bases (pH increasers) and acids (pH decreasers) must be used. The amounts necessary will, of course, vary depending on the amount of water in your pool and how much out of balance your water is. It is critical that you adhere to the directions on the product’s packaging.

      Having your water chemistry balanced is crucial for proper pool maintenance. In so many aspects, the pH level is the basis of that balance, as we have already stated. 

      Even though there are a variety of elements that can affect pH level, with little practice and routine monitoring, you can make sure that your water consistently maintains the pH level that is best for your pool equipment and good for your pool visitors.