CDC recommends keeping the pH of your pool between 7.2 and 7.8. This means that you should check the pH of your pool frequently. The result of maintaining the pH level at the proper level and range is a perfect combination of germ-killing and pool-system lifespan.

      If you need to clean your pool using muriatic acid substitute products, shop around since certain items are accessible in your local or grocery store. It may clean your pool just as effectively as products marketed specifically for pool cleaning while also saving you money.

      Perhaps it isn’t about the money for you. If you’re merely looking for a natural or safe pool cleaner to keep your family healthy and happy, keep reading for some recommended items to clean your pool.

      Safe and Reliable Muriatic Acid Substitute Pool Cleaners: Which Is Best For You?

      Organic pH control system

      It’s the most tried-and-true CO2 solution for homes on the market. This technology provides a safer, more efficient pool maintenance experience, as well as a consistently regulated pH even in the most extreme conditions.

      Carbon dioxide is a non-corrosive gas that can substitute acids like muriatic acid in pool and spa chemical treatments.

      It creates carbonic acid, which is a weak acid used to lower the pH of water. The CO2-based pH control system uses all-natural carbonic acid. It uses a completely organic process to manufacture a unique, non-toxic acid that requires no mixing, handling, or dispensing.

      Baking Soda

      A non-abrasive cleaning may be made from water and baking soda, and it works excellent on pool tile and grout. It can also be used on a concrete or stone pool surface. This is arguably the most straightforward and least expensive method of organically cleaning your pool.

      Baking soda will help raise the alkalinity of your pool and is significantly less expensive than other alkalinity boosters. To do so, add 1.5 pounds of baking soda per 10,000 gallons of water to bring the overall alkalinity up to 10 parts per million (ppm).

      Pool PH testing


      Simple household bleach, commonly known as sodium hypochlorite, can remove stains from grout that baking soda couldn’t.

      A pool can also be shocked with bleach. After all, shocking your pool simply means superchlorinating it, which means increasing the chlorine level to the point where it kills all germs and existing algae.

      If you use one gallon of 5.25 percent bleach per 10,000 gallons of water, the free chlorine level will rise by 5.25 ppm; therefore, go slowly to avoid exceeding the recommended 3 ppm level. Also, be sure to get the unscented type.


      You might have a box of Borax next to your washing detergent. It’s marketed as a laundry enhancer, and it’s effective at removing odors from clothing. It’s also a natural cleanser you can use around the house, so you may use it to clean your pool naturally.

      Simply mix it with water to produce a paste, then brush away sticky residue, slippery patches, and stains in and out of the pool. It’s not as cheap as baking soda, but it’s still more affordable than most speciality pool cleaning products.

      You can use borax to raise your pool’s pH as well by adding 10,000 gallons of water per half-cup. The amount you’ll need will be determined by how much you need to raise the pH level. To avoid over-raising the pH, take it slowly.

      Time to Change Your Cleaning Habits

      Poolsmith Technologies will help you with how you can care for your pool. With the addition of CO2, we can now provide a unique, non-toxic solution to regulating the pH balance of your pool.

      Are you willing to give this safe alternative to muriatic acid a shot? Fill out our online form now!